We stock a full line of
hardwood products, available in many sizes and dimensions. However, if you are
looking for something we do not carry, we can special order most items within
one day. We also custom mill
all of our own products according to your needs or specifications. Call us today
for a current market price.
Our Hardwood Lumber Stock
Alder
• Ash • Birch • Mahogany •
Poplar • Red Oak • Soft Maple • White Pine
4/4 through 8/4 • Random Widths and Lengths
#1 Common through FAS
Alder machines well and is excellent for turning. It nails, screws and glues well, and can be sanded, painted, or stained to a good finish. When stained, it blends with walnut, mahogany or cherry. It dries easily with little degrade and has good dimensional stability after drying.
Ash machines well, is good in nailing, screwing and gluing, and can be stained to a very good finish. It dries fairly easily with minimal degrade, and there is little movement in performance.
Birch works fairly easily, glues well with care, takes stain extremely well, and nails and screws satisfactorily where pre-boring is advised. It dries rather slowly with little degrade, but it has moderately high shrinkage, so is susceptible to movement in performance. It is often intermixed with or substituted for Soft Maple.
Poplar is a versatile wood that is easy to machine, plane, turn, glue and bore. It dries easily with minimal movement in performance and has little tendency to split when nailed. It takes and holds paint, enamel and stain exceptionally well.
Red oak machines well, nailing and screwing are good although pre-boring is recommended, and it can be stained to a good finish. It can be stained with a wide range of finish tones. It dries slowly.
Soft maple machines well and can be stained to an excellent finish. It glues, screws, and nails satisfactorily. Polishes well and is suitable for enamel finishes and brown tones. It dries slowly with minimal degrade and there is little movement in performance. It is often intermixed with or substituted for Birch.
White Pine usually does not split when nailed, it machines easily with a slightly fuzzy surface, and turns, bores, and sands well. It takes paint and stain well to produce a good finish although care is required where the surface is fuzzy. It has low to moderate shrinkage and good dimensional stability.
Alder machines well and is excellent for turning. It nails, screws and glues well, and can be sanded, painted, or stained to a good finish. When stained, it blends with walnut, mahogany or cherry. It dries easily with little degrade and has good dimensional stability after drying.
Available
by Special Order
Beech
• Cherry • Hard Maple •
Hickory • Lyptus • Sapele • Walnut • White Oak
4/4 through 8/4 • Random Widths and Lengths
#1 Common through FAS
Beech works readily with most hand and machine tools. It has good nailing and gluing properties and can be stained to a good finish. The wood dries fairly rapidly but with a strong tendency to warp, split and surface check. It is subject to a high shrinkage and moderate movement in performance.
Cherry is easy to machine, nails and glues well and when sanded and stained, it produces an excellent smooth finish. It dries fairly quickly with moderately high shrinkage, but is dimensionally stable after kiln-drying.
Hard maple dries slowly with high shrinkage, so it can be susceptible to movement in performance. Pre-boring is recommended when nailing and screwing. With care it machines well, turns well, glues satisfactorily, and can be stained to an outstanding finish. Polishes well and is suitable for enamel finishes and brown tones.
The heaviest of American hardwoods, hickory can be difficult to machine and glue, and very hard to work with hand tools, so care is needed. It hold nails and screws well, but there is a tendency to split so pre-boring is advised. The wood can be sanded to a good finish. The grain pattern welcomes a full range of medium-to-dark finishes and bleaching treatments. It can be difficult to dry and has high shrinkage.
Walnut works easily with hand and machine tools, and nails, screws and glues well. It holds paint and stain very well for an exceptional finish and is readily polished. It dries slowly, and care is needed to avoid kiln degrade. Walnut has good dimensional stability.
White oak machines well, nails and screws well although pre-boring is advised. Since it reacts with iron, galvanized nails are recommended. Its adhesive properties are variable, but it stains to a good finish. Can be stained with a wide range of finish tones. The wood dries slowly.
Beech works readily with most hand and machine tools. It has good nailing and gluing properties and can be stained to a good finish. The wood dries fairly rapidly but with a strong tendency to warp, split and surface check. It is subject to a high shrinkage and moderate movement in performance.
